0102030405
High-Speed Laser Pipe Cutting Machine - G9S | China Factory Suppliers for Efficient Small Pipe Solutions
Key Component Configuration
| Order Number | Component Name | Brand | Model / Origin |
| Key Components | |||
| 1 | Fibre Laser | MAX / Raycus | 1500–3000W / Top-tier domestic brands |
| 2 | Cutting Head | OSPR / RAYTOOLS | 1500–3000W / Top-tier domestic brands |
| 3 | Gear Rack | Specific and Precise | Taiwan, China |
| 4 | Reduction Box | New Bao, Japan | 090 / China |
| 5 | Linear Guide Rail | TDX | Taiwan, China |
| 6 | Motor | Hekawa | High-performance motor, max speed 4000 RPM, bus-type configuration |
| 8 | Water Cooling Unit | Hanli / Teyu | Top-tier domestic brands |
| 10 | Electronic Control Element | Delixi / Schneider | China |
| 11 | Airway Component | AIRTAC, Taiwan | China |
| Processing Components | |||
| 12 | Cartridge | Self-developed, Suzhou | RY-90 |
| 13 | Auxiliary Feeding | Self-developed, Suzhou | Servo Transfer |
| Software System | |||
| 14 | Operating System | Self-developed, Suzhou | Three Dimensional Cutting System |
| Other | |||
| 15 | Operation Direction | Left-hand Car | Standard Configuration |
| 16 | Packaging & Transportation | Standard Packaging | Standard Configuration |
Complete Machine Technical Parameters
| Class | Attribute | Parameter Values |
| Environment Attribute | Device Series | Small Platform: 80 Series |
| External Dimensions (mm) | 8610 × 1800 × 1820 | |
| Total Weight (tons) | Approx. 1.5T | |
| Full Power Consumption (KW) | 20 ～ 25 | |
| Running Temperature (℃) | 0 – 40 | |
| Range of Work | Processing Path (mm) | Pipe Diameter: 10–90 |
| Incision Width (mm) | 0.1–0.2 | |
| Trip Range | Single Clamping Stroke of Chuck (mm) | 10–90 |
| Y / X / Z / U Axis Stroke (mm) | 6500 / 150 / 250 / Unlimited Rotation | |
| Resetting Accuracy / Speed | X / Y Axis Positioning Accuracy (mm) | ±0.05 \ 1000 (7000 ±0.06) |
| X / Y Axis Repeatability (mm) | ±0.05 | |
| Rotation of X-Axis Repeatability (arc minutes) | ≤ 5 | |
| Maximum Rotation Speed of X-Axis (RPM) | 130 HuiChuan | |
| Velocity and Acceleration | Maximum Acceleration of X / Y Axis | 1.5G |
| Maximum Idle Speed on X-Axis (m/min) | 100 | |
| Maximum Idle Speed of Y-Axis (m/min) | 130 HuiChuan | |
| Automatic Feeding Length (mm) | 4000 ~ 6500 | |
| Automatic Feeding Diameter (mm) | 15–90 | |
| Loading Machine Capacity (kg) | 1500 | |
| Cutting Parameters | Tail Length (mm) | External Clamp 45 |
| Minimum Cutting Length (mm) | Standard 600 (Optional 1500) — Customizable |
* The above technical specifications were established through testing on March 1, 2023.
Water, Electricity & Gas Requirements
| Electricity Demand | Related Data | Notes |
| Three-phase five-wire 380～400VAC / 50Hz Distribution Box |
380V ±2% / 50Hz |
1. If voltage fluctuation exceeds 5%, a voltage stabilizer should be installed. A three-phase five-wire power supply of at least 45KVA is recommended. 2. The three-phase power supply must maintain an imbalance below 2.5% (Note: The 400VAC/50Hz/380V±2%/50Hz voltage must not experience sudden surges or power outages, as these may damage the laser). 3. The diameter of a single cable wire shall not be less than 10 square. 4. The power supply must be effectively grounded with a resistance ≤3Ω. 5. Three circuit breaker interfaces are required for the cutting machine wiring. |
| Cooling Water Requirement | Related Data | Notes |
| Chiller Water | Distilled Water / Deionized Water | 30L, conductivity less than 10 μS |
| Protective Gas Demand | Related Data | Notes |
| Oxygen | Purity: ≥99.6% Gases with purity below 99.6% may affect cutting performance and quality. |
Cutting carbon steel and various iron plates with oxygen-assisted cutting achieves high-quality and efficient results. |
| Pressure: 1 MPa Flow Rate: ≥ 1 m³/min |
||
| Nitrogen | Purity: ≥99.99% Gases with purity below 99.99% may adversely affect cutting performance and quality. |
Cutting of stainless steel and galvanized sheets is performed with nitrogen-assisted cutting, achieving high-quality results. |
| Pressure: 2.5 MPa Flow Rate: ≥ 2.5 m³/min |
||
|
1. Bottled gas requires the installation of a pressure reducing valve for the cylinder. 2. Oxygen (O₂) pressure reducing valve: Adjustable outlet pressure range 0.4 MPa to 1.2 MPa, pressure fluctuation range 1%. 3. Nitrogen (N₂) pressure reducing valve: Adjustable outlet pressure range 0.4 MPa to 5 MPa, pressure fluctuation range 1%. |
||
| Air | Working Pressure ≥ 1.3 MPa |
1. If air cutting is required, the user shall provide a compressor, refrigerated dryer, air receiver, and four-stage filtration (filtering precision 0.01 microns). 2. The gas in the air-to-laser cutting machine must be free of water and oil, as these contaminants may compromise cutting quality and reduce the lifespan of various lenses. 3. The condensation point temperature must not exceed 5°C. 4. Oil content ≤ 0.003 ppm, solid particles ≤ 0.01 μm |
| Flow Rate: ≥ 1.8 m³/min | ||
| Installation Environment | Related Data | Notes |
| Temperature Requirement | 5 ~ 30°C | The laser should be placed in a separate air-conditioned isolation room. |
| Humidity Requirements | < 70% | |
| Foundation Requirements |
Site levelling No strong vibrations |
1. In case of strong vibrations, additional anti-vibration grooves should be installed. 2. The foundation must ensure sufficient strength and must not allow settlement. 3. Install the foundation according to the foundation installation drawings provided by our company. |
|
Note: The equipment placement area must have good ventilation conditions, and be free from dust, corrosion, and leakage. The control cabinet and laser are the core components of the equipment, and exposure to devices such as arc welding and discharge machining machines should be avoided. Electromagnetic interference from the equipment must be avoided to prevent interference with its normal operation. |
||
Frequently Asked Questions
Q
What laser power options are available for this laser tube cutting machine?
The machine supports fibre laser power options ranging from 1500W to 3000W, using top-tier domestic brands such as MAX and Raycus. The appropriate power level depends on the material type and thickness you intend to cut.
Q
What pipe diameter range can this machine process?
This machine is designed for pipe diameters ranging from 10mm to 90mm. The chuck single clamping stroke also supports the same 10–90mm range, and the automatic feeding system handles diameters from 15mm to 90mm.
Q
What type of cutting gas should I use for different materials?
For carbon steel and iron plates, oxygen (purity ≥99.6%) is recommended for high-quality and efficient cutting. For stainless steel and galvanized sheets, nitrogen (purity ≥99.99%) is used to achieve clean, high-quality cuts. Air cutting is also supported with proper filtration equipment.
Q
What are the electrical supply requirements for this machine?
The machine requires a three-phase five-wire 380V ±2% / 50Hz power supply with a recommended capacity of at least 45KVA. The power supply must be properly grounded (resistance ≤3Ω), and voltage fluctuation must not exceed 5%. A voltage stabilizer is recommended if this cannot be guaranteed.
Q
What are the installation environment requirements for this equipment?
The machine should be installed in a well-ventilated area free from dust, corrosion, and moisture. The ambient temperature should be maintained between 5°C and 30°C with humidity below 70%. The laser unit should ideally be placed in a separate air-conditioned room, and the area must be free from strong electromagnetic interference and vibrations.
Q
What is the minimum cutting length, and can it be customized?
The standard minimum cutting length is 600mm, with an optional configuration of 1500mm. Custom minimum cutting lengths are also available upon request to meet specific production requirements.
